联系我们
Installation and lubrication of cylindrical gear reducer
1. Cylindrical gear reducers generally need to be installed on a horizontal surface with an inclination of no more than 10 °. If the inclination is greater than 10 ° due to special needs, please contact our company before use to discuss relevant matters together.
1、 Installation
1. Cylindrical gear reducers generally need to be installed on a horizontal surface with an inclination of no more than 10 °. If the inclination is greater than 10 ° due to special needs, please contact our company before use to discuss relevant matters together.
2. When connecting the input shaft and output shaft with the power and supporting machinery, if coupling is used, it is required that the shaft be strictly aligned with the shaft, and there should be no misalignment. The use of triangular belts and chains should not be too tight or loose.
3. The installation foundation shall be firm and reliable, free from vibration and looseness. The fixing screws shall be selected in strict accordance with relevant standards and regulations.
4. Installation screws should be checked irregularly for tightness and secure fixation. Spring washers should be used as far as possible.
2、 Lubrication
1. Gear reducers generally use oil pool lubrication. Before use, it is important to add medium and extreme pressure gear oil N220 or N320 to the specified position (20-30mm above the lowest tooth), and regularly replenish it.
2. After the first 50 hours of use, the oil should be replaced immediately, and the oil inside the body should be cleaned. After that, the oil should be thoroughly replaced every three months.
3. If the oil seal leaks, please replace it yourself as soon as possible.
Address: No. 5, Zhuxiang Road, Wujin Economic Development Zone, Changzhou City
Tel: +86 519-86536592
Mobile: +86 15295165866
Email: hepgear@sina.com
Feedback
*Please fill in the demand information and we will contact you as soon as possible
Follow us